DOT - South Dakota Department of Transportation
03/20/2026 | Press release | Distributed by Public on 03/20/2026 06:58
2026 Spring Load Limit Restrictions – Press Release #2
2026 Spring Load Limit Restrictions - Press Release #2
For Immediate Release:
Friday, March 20, 2026
Contact:
Dan Varilek, Winter Maintenance Specialist, 605-773-3571
2026 Spring Load Limit Restrictions - Press Release #2
(Restrictions scheduled for REMOVALthe week of March 23 - 27, 2026)
PIERRE, S.D. - Spring Load Limit Restrictions will be REMOVEDfrom the road segments shown in the table below. The effective dates are included in the table.
2026 STATE HIGHWAY SPRING LOAD LIMIT RESTRICTIONS (REMOVALS)
|
Effective Date of Removal: |
Highway |
Location |
Begin/End Mile Markers |
Length |
Posting |
Region |
|
March 23, 2026 |
S.D. Highway 53 |
S.D. Highway 44 to Interstate 90 |
49.98 to 83.39 |
33.4 |
6 Tons/Axle |
Pierre |
|
March 23, 2026 |
S.D. Highway 1806 |
Lower Brule Reservation to U.S. Highway 83 |
164.43 to 180.05 |
15.6 |
7 Tons/Axle |
Pierre |
|
March 23, 2026 |
S.D. Highway 63 |
Agtegra Entrance at McLaughlin to the N.D. State Line |
252.19 to 260.64 |
8.5 |
6 Tons/Axle |
Pierre |
|
March 23, 2026 |
S.D. Highway 79 |
S.D. Highway 168 to S.D. Highway 20 west of Reva |
150.70 to 199.32 |
48.6 |
8 Tons/Axle |
Rapid City |
|
March 23, 2026 |
S.D. Highway 25 |
From S.D. Highway 38 to S.D. Highway 34 |
61.72 to 82.83 |
21.1 |
7 Tons/Axle |
Mitchell |
|
March 23, 2026 |
S.D. Highway 1804 |
From S.D. Highway 44 to Platte Creek |
112.13 to 120.16 |
8.0 |
6 Tons/Axle |
Mitchell |
|
March 23, 2026 |
S.D. Highway 1806 |
U.S. Highway 18 north to Whetstone |
15.68 to 25.75 |
10.0 |
6 Tons/Axle |
Mitchell |
|
March 23, 2026 |
S.D. Highway 1806 |
S.D. Highway 44 to Lucas Corner |
37.88 to 48.55 |
10.7 |
6 Tons/Axle |
Mitchell |
|
March 23, 2026 |
S.D. Highway 251 |
Nebraska State Line to U.S. Highway 18 |
0.00 to 15.84 |
15.8 |
6 Tons/Axle |
Mitchell |
A map of state-proposed spring load restrictions and a list of county roads are both posted on the South Dakota Truck Info website at https://sdtruckinfo.sd.gov/rules-regulations/size-weight-regulations/spring-load-restrictions/and on the SD511 website at https://www.sd511.org. On the SD511 site, click on Traffic Noticesthen CVO Restrictionsto see restrictions placed into effect.
A spring load restriction report is usually issued in advance of any major load restriction change. This report is issued for guidance only and does not take precedence over any load restriction signs in place. For further information, or to obtain a copy of a Spring Load Restriction Map, please contact the South Dakota Department of Transportation (SDDOT) at 605-773-3571.
Spring Load Limit Email List Subscription:
Individuals can subscribe to an email list to receive spring load limit restrictions electronically. Subscribe at https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS. Click "subscribe" located on the right-hand side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the spring load limit list, visit the same site, click "unsubscribe" and enter the information and email with which you previously subscribed.
When restrictions go into effect, a notice is sent out via press release, SDDOT social media, SDDOT website, the State news site, and posted to the spring load restriction page of the South Dakota Truck Info website.
County Road Information:
SDDOT personnel remind motorists that county road posted load limits are not determined or enforced by the state. Please use the county information provided on the South Dakota Truck Info website to contact the county superintendent for questions or concerns.
For more information about the SDDOT spring load limit process, please contact Dan Varilek, Winter Maintenance Specialist, at 605-773-3571 or via email at [email protected].
-30-
DOT - South Dakota Department of Transportation published this content on March 20, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on March 20, 2026 at 12:59 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]