11/13/2026 | Press release | Archived content
This is the question customers ask most. Before answering, let's look at where an encoder actually works.
Magnetic encoders are widely used in motors. Motors already contain permanent magnets and coils, and the encoder measures angles while those magnetic fields are present. This happens every day in normal operation.
The electromagnetic brake common in joint motors uses changes in the electromagnetic field to open and close. With the encoder running, we moved it progressively closer to the brake to see whether its angle output changed.
In the second demo, the motor rotor's permanent magnet sits right next to the encoder. The field is always there-let's see whether the reading stays accurate.
Then we buried the encoder entirely in magnetic powder. The magnetized powder sticks to the magnetic ring and falls into the air gap-this time, magnetic interference and contamination appear together.
Across all three demonstrations, the angle output never jumped. They correspond to the three most realistic situations inside a joint: a brake opening and closing repeatedly, a motor magnet right next door, and magnetic powder covering the whole encoder. The first two are dynamic magnetic interference; the third is magnetic powder contamination, with interference and contamination present at the same time.
Back to the question at the start: are magnetic encoders afraid of magnets? The answer is neither a simple yes nor a simple no. A magnetic encoder works on magnetic fields, but that does not mean any interference must affect its operation. Immunity to magnetic interference is about the boundary, not about presence or absence. Every technology has its applicable range, and every product has its design limits. Claiming that "magnetic encoders are definitely afraid of magnets" without specifying the application, the external field conditions and the performance targets is not rigorous.
So the real question is: under external magnetic interference, where exactly is the encoder's boundary?
KingKong's magnetic encoders rely on proprietary spatial measurement technology: multiple magnetic sensors are distributed around the circumference, and multiple read heads observe the field at the same time and calibrate each other. It's like several people standing on a boat. When a wave lifts the boat, everyone rises together and stays in sync.
The angle output stays stable even in complex magnetic environments. This does not depend on any single algorithm; it rests on full-stack in-house capabilities spanning magnetic design, mathematical modeling, analog signal processing and manufacturing. Beyond the immunity demonstrated by current standard products, we can also provide system-level solutions for a customer's specific magnetic environment. The measurement principle has not changed-the way we measure the field has.
KingKong has always pursued technical innovation and leadership. Immunity to magnetic interference is one expression of that system: we do not avoid difficult operating conditions, we solve them with technology-that is KingKong's answer.