05/14/2026 | Press release | Distributed by Public on 05/14/2026 09:02
The recalled light fixture's frame can detach from the pendant downrod during installation, posing a risk of serious injury or death from an impact hazard.
About 170
Minka Lighting Group toll-free at 888-390-3989 from 7 a.m. to 4 p.m. PT, email at [email protected]or online or www.minka.com and click "PRODUCT RECALL NOTIFICATION" at the bottom of the page for more information.
This recall involves three models of the Minka Bardon Series Pendant Light Fixtures. Models include the 8-Light Pendant (model number N1847-776), the 12-Light Pendant (model number N1848-776) and the 5-Light Island (model number N1849-776). The model number is printed on the ceiling plate of the light fixture. For installed fixtures, consumers should identify the fixture based on the photographs below. The fixtures include either one downrod (8-Light and 12-Light Pendants) or two downrods (5-Light Island) to attach the fixture to the ceiling. Each of the fixtures has a polished brass finish with slatted frosted glass shades. Please note that the 4-Light Semi Flush fixture (model number N1844-776) does not utilize a downrod and is not affected by this recall.
Consumers should stop using the recalled Minka Bardon Series Pendant Light Fixtures immediately and contact Minka Lighting Group to receive a full refund in the form of a check sent by mail. Consumers should keep clear of the area directly beneath installed light pendants. Contact Minka Lighting Group for instructions on how to determine if the light fixture is included in the recall and for disposal instructions.
The firm has received one report of a light fixture detaching from the pendant downrod. No injuries have been reported.
Minka Lighting Group, LLC, of Corona, California
The mattresses violate the mandatory flammability standard for mattresses, posing a risk of serious injury or death from fire.
The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Furthermore, the bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard.
The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails also do not meet structural stability or retention strap requirements, posing a fall hazard. The bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard. In addition, the bed rails do not bear the required hazard warning labels.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the STURDY Act.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
For lifesaving information: