11/11/2026 | Press release | Archived content
Home > News > Industrial > A Buyer's Guide for Truck Fuel Transfer Tanks
Every trip back to the yard to refuel costs your crew valuable time and your operation real money. A truck-mounted fuel transfer tank with a pump delivers fuel directly to your equipment instead, so excavators, generators, and loaders stay productive on the job site.
This guide explains what a complete system includes, which tank and pump combinations fit each fluid, how to size capacity for your fleet, and the compliance basics to understand before installation.
A truck fuel pump is only one part of the package. A complete vehicle fuel delivery system typically includes several components, and each one affects how safely and efficiently you can fuel equipment in the field.
The fluid you transfer determines the appropriate tank material, pump design, and seals. Choosing a combination that isn't rated for your fluid can damage equipment or create a genuine safety hazard.
Some operators install a diesel tank and pump alongside a smaller DEF tank on the same truck, which allows one driver to service an entire job site in a single visit.
Start with daily fuel consumption rather than tank size. Calculate what each machine typically burns in a day, then add a buffer of approximately 20 percent.
For example, six pieces of equipment that each consume 15 gallons daily need about 90 gallons. With the buffer included, a 100- to 110-gallon tank covers a full day of fueling without a second trip.
Consider these additional factors as you narrow down your options:
Fuel consumption also varies considerably by season and project type, so review actual usage records from several recent jobs before committing to a specific capacity. Underestimating demand forces additional refueling trips, while oversizing adds unnecessary weight, expense, and regulatory complexity.
Larger operations frequently pair truck-mounted units with aboveground storage tanks at the shop, allowing trucks to refill quickly at the beginning of each shift.
Even a well-designed system requires careful installation. Professional installation is especially worthwhile when your system includes a hose reel, meter, and filter assembly, because proper component alignment affects both performance and long-term reliability. Always follow the tank and pump manufacturer's instructions, and keep these fundamentals in mind.
Northwest Pump has helped fleets, contractors, and agricultural operations across the West move fuel safely since 1959. Our team can match the right transfer pump, meter, and tank to your fluid, fleet size, and vehicle, then support it with dependable service whenever you need it.
Browse our transfer pumps and meters, or contact the Northwest Pump sales team at [email protected] or 1-800-452-PUMP to discuss your setup.
Calculate the daily fuel consumption of every machine you service, then add about 20 percent. Most contractors choose tanks between 50 and 119 gallons.
Some pumps are rated for both fuels, but you should never alternate fluids in the same tank. Use separate, clearly labeled tanks and pumps for each fuel.
Most 12-volt pumps deliver about 8 to 25 gallons per minute. Hose length, filters, and fuel temperature can all reduce that rate.
A meter isn't required, but it's highly recommended. It shows exactly how much fuel each machine consumes and supports accurate billing and tax records.
No. DEF corrodes aluminum and certain metals, and even small amounts of fuel can contaminate it. Use a dedicated DEF tank and pump.
Usually not for diesel in a tank of 119 gallons or less. Larger tanks and gasoline involve stricter regulations, so check with your state DOT.
Northwest Pump's staff make business great because they are very well educated in the industry. ~Liquid Controls