MoDOT - Missouri Department of Transportation

08/17/2026 | Press release | Distributed by Public on 08/17/2026 06:02

Seal Coat Operation to Impact Traffic on Route N in Cape Girardeau and Bolliger Counties

SIKESTON - Missouri Department of Transportation crews will be making driving surface improvements on Route N in Cape Girardeau and Bollinger counties.

This section of roadway is located from Route 25 in Cape Girardeau County to Route 51 in Bollinger County.

Weather permitting, work will take place Monday, Aug. 18 through Friday, Aug. 21 from 7 a.m. to 5 p.m. daily. Drivers should anticipate short, intermittent lane reductions in the vicinity of the work zone. Flaggers will be present to help direct traffic.

Seal coats are a pavement repair process that is used by MoDOT on roads with lower traffic volumes to maximize available resources and extend the life of the roadway. Hot emulsion oil is sprayed onto the surface of the road, followed by finely ground rocks which are then compacted to adhere to the roadway. Excess material is swept off the surface, leaving an improved roadway that will hold up longer against the elements.

The method costs about one third the amount of a traditional asphalt overlay. The treatment keeps water from penetrating the surface, extends the life of the roadway up to seven years, and provides improved traction.

The work zone will be marked with signs. Motorists are urged to use extreme caution while traveling near the area.

For additional information, contact MoDOT's Customer Service Center toll-free at 1-888-ASK-MODOT (1-888-275-6636), or visit www.modot.org/southeast .

###

facebook.com/MoDOTSoutheast

twitter.com/MoDOTSoutheast

youtube.com/MoDOTSoutheast

MoDOT - Missouri Department of Transportation published this content on August 17, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on August 17, 2026 at 12:02 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]