Results

MoDOT - Missouri Department of Transportation

06/26/2026 | Press release | Distributed by Public on 06/26/2026 11:14

Seal Coat Operations to Impact Traffic on Route W in Butler County

SIKESTON - Contractor crews will be making driving surface improvements with an 11-foot width restriction on Route W in Butler County.

This section of roadway is located from Route O to Route 60.

Weather permitting, work will take place Monday, July 13 through Monday, Aug. 31 from 6 a.m. to 6 p.m. daily. Drivers should anticipate short, intermittent lane closures and traffic will be directed with the use of flaggers and a pilot car.

Seal coats are a pavement repair process that is used by MoDOT on roads with lower traffic volumes to maximize available resources and extend the life of the roadway. Hot emulsion oil is sprayed onto the surface of the road, followed by finely ground rocks which are then compacted to adhere to the roadway. Excess material is swept off the surface, leaving an improved roadway that will hold up longer against the elements.

The method costs about one third the amount of a traditional asphalt overlay. The treatment keeps water from penetrating the surface, extends the life of the roadway up to seven years, and provides improved traction.

The work zone will be marked with signs. Motorists are urged to use extreme caution while traveling near the area.

For additional information, contact Resident Engineer Matt Wilkerson at 573-472-9013, MoDOT's Customer Service Center toll-free at 1-888-ASK-MODOT (1-888-275-6636), or visit www.modot.org/southeast .

###

facebook.com/MoDOTSoutheast

twitter.com/MoDOTSoutheast

youtube.com/MoDOTSoutheast

MoDOT - Missouri Department of Transportation published this content on June 26, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on June 26, 2026 at 17:14 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]