09/17/2026 | Press release | Distributed by Public on 09/17/2026 07:29
The drain covers violate the mandatory safety standard under the Virginia Graeme Baker Pool and Spa Safety Act (VGBA) because they do not bear the required product markings, posing entrapment and drowning hazards. The drain covers also violate the safety requirements by not stating the service life of the covers, installation instructions and maintenance instructions.
CPSC urges consumers to remove, replace and dispose of the drain covers immediately and stop using pools with the drain covers until the covers have been replaced. Do not sell or give away these hazardous products. Ensure all pools and spas have VGBA-compliant drain covers and teach children to stay away from drains.
About 480
The U.S. Consumer Product Safety Commission (CPSC) is warning consumers to stop using Lanyitongke pool drain covers immediately. The drain covers violate the mandatory safety standard under the Virginia Graeme Baker Pool and Spa Safety Act (VGBA) because they do not bear the required product markings, posing entrapment and drowning hazards. The drain covers also violate the safety requirements by not stating the service life of the covers, installation instructions and maintenance instructions.
CPSC urges consumers to remove, replace and dispose of the drain covers immediately and stop using pools with the drain covers until the covers have been replaced. Do not sell or give away these hazardous products. Ensure all pools and spas have VGBA-compliant drain covers and teach children to stay away from drains.
CPSC issued a Notice of Violation to the seller Lanyitongke, of China. Lanyitongke has not responded to CPSC requests to conduct a recall or offer a remedy for the pool drain covers to consumers.
This warning involves Lanyitongk-branded pool drain covers. The white, round covers measure about 7.87 inches in diameter and come sealed in a clear bag. Model "SP1030-A" is molded on the drain cover. "HOW9109A" and "D2LGC021" are printed on the bag's white label.
Report any incidents involving injury or product defect to CPSC at www.SaferProducts.gov.
None
Lanyitongke, of China
The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury. In addition, the helmets have a button cell battery that does not bear the warning labels required by Reese's Law. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.
During operation the heaters can produce high levels of carbon monoxide (CO), posing a risk of serious injury or death from carbon monoxide poisoning.
The engine rocker arm on the recalled motorcycles can seize or stick and the exhaust valves can remain open or break, posing a risk of serious injury or death from a crash hazard.
The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the retention system, positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
For lifesaving information: