05/14/2026 | Press release | Distributed by Public on 05/14/2026 09:02
The ATV's speed limiter control can malfunction, causing unexpected speed and acceleration, posing a serious risk of injury or death from crash hazard.
About 2,820
BRP toll-free at 888-272-9222 from 8 a.m. to 8 p.m. ET Monday through Sunday, online at https://can-am.brp.com/off-road/us/en/owners/safety/safety-recalls.htmlor https://can-am.brp.com/off-road/us/en/ and click on "Safety Recalls" at the bottom of the page.
This recall involves model years 25 and 26 Can-Am Outlander 500 or 700 Pro and Max Pro ATVs equipped with Speed Limiter Mode and model years 23 and 24 Can-Am Outlander Pro and Max Pro ATVs equipped with Speed Limiter Mode that received an Engine Control Module (ECM) software update at a dealership on or after February 3, 2026. The ATVs were sold in Tan, Green, Camo and Gray. The model year (MY) can be identified by the 10th character of the vehicle's 17-digit Vehicle Identification Number (VIN). P = 2023, R = 2024, S = 2025, T = 2026. The VIN label is located on the front right side of the vehicle, on the frame. The stamped VIN is located on the front member on the right side of the vehicle. The model name "OUTLANDER PRO" is displayed on the vehicle's front side and the 'Can-Am' branding is located on the left rear fender near the tail section.
Consumers should stop using the Speed Limiter Mode immediately and contact an authorized Can-Am Off-Road dealer to schedule a free repair at the dealership, involving a software update that will take less than one hour. To find an authorized dealer visit https://can-am.brp.com/off-road/us/en/find-a-dealer.html#/search.
The firm has received one report of a speed limiter failure that caused sudden acceleration and flipped the ATV, resulting in scrapes and bruises to the rider.
BRP US Inc., of Sturtevant, Wisconsin
The weight plates can fail to engage completely during weight adjustment and dislodge from the dumbbell handle when used posing an impact hazard.
The recalled drain covers violate the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing entrapment and drowning hazards to swimmers and bathers.
The recalled helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the positional stability and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The recalled helmets violate the mandatory safety standard for bicycle helmets because they do not comply with the positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
For lifesaving information: