San Diego Unified Port District

11/17/2026 | Press release | Distributed by Public on 11/17/2026 19:35

Port of San Diego to Repair Eroded Embankment Along Bayshore Bikeway in Imperial Beach

Project Will Include Periodic Bike Path Closures

The Port of San Diego will soon begin making emergency repairs to an eroded embankment and damaged culverts and headwalls at Pond 10A, where the Bayshore Bikeway crosses a tidal channel in Imperial Beach (South San Diego Bay between State Route 75 and Flamingo Trail). The damage was caused by the recent surge in water levels caused by a combination of El Niño conditions and the Kelvin waves. Construction is anticipated to start in mid-November with work continuing through mid-December. The project is expected to last approximately 15 to 20 days, depending on tidal conditions. During some portions of the work, periodic partial closures of the Bayshore Bikeway in the project area will be necessary. During this construction, special precautions should be taken by all transiting or accessing the bike path.

The project will stabilize the existing structure and address erosion and structural deterioration at the site. Work includes installation of temporary traffic control and erosion prevention measures; removal of loose embankment material and debris; dewatering or bypassing water flows as needed; rehabilitation of existing culverts through slip lining and grouting; reinforcement of the headwall with tiebacks, anchors, and bracing; reconstruction of the embankment; and installation of rock slope protection in erosion-affected areas.

Contractors will provide advance warning signs, traffic control measures, and flaggers to help direct bicyclists and pedestrians safely through and around the area.

The emergency repair project is intended to preserve public access along the Bayshore Bikeway while protecting infrastructure and preventing additional damage until permanent improvements are implemented.

San Diego Unified Port District published this content on November 17, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on November 18, 2026 at 01:35 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]